BENEFITS AND APPLICATIONS
- non-linear analog flow
- 8 digit readout
- Hi / Lo set points
Model 926 Analog/Digital Signal Conductor
Takes the non-linear analog flow signal from one of our probe or in-line mass flow meter transducers and converts it to a linear output signal. Unique 12 bit data system assures signal smoothness and optimum accuracy. In order to maximize efficiency and minimize heat generation, switching supplies are used. Options available include: local display of Flow, 8 digit Totalization and HI/LO alarm set points.
Features: |
---|
Flow Rate Display |
Vacuum Fluorescent or LED numbers and engineering units legends |
Flow Totalizer |
8 digit readout |
30 days backup battery for count |
Totalizer with pulse output normally +12 VDC @ 30 milliseconds standard, options are +5, +24 VDC etc. as well as NPN transistor open collector |
Options: |
Batch counter |
Alarm Outputs |
Hi / Lo set points |
Multiple Sensing Points |
Forward / Reverse Direction Sensing |
Dual Range / Dual Fluids |
Dual range is taking one flowrange and dividing it into two separate flowranges for the 4-20 MADC output, switch selectable |
Dual fluids is one transducer calibrated for two fluids, switch selectable |
Temperature Range: |
-40°C to 70°C without display |
-20°C to 70°C with flow rate or totalizer display |
Power: |
110v AC; 220v AC @ 1/2 Amp; 24v DC @ 1 Amp |
Isolated Output |
Current 4 to 20 milliamps |
1000 ohm (maximum load |
voltage 0 to 10 MV |
0 to 100 MV |
0 to 5 VDC |
1 to 5 VDC |
High impedence load power is supplied by internal 30 volt source |